Actuatec Corporation

* The field of Red font is required to fill out.
CONTACT INFORMATION

Name
Company
Dept.
Tel	ext.
Fax
Address
web
e-mail

CYLINDER SPECIFICATIONS

01 Hydraulic Fluid HL, HLP(Mineral Oil) HFD-R, HFD(Phosphate Ester) HFC(Water glycol)

02 Operation Condition
Operating Temperature : Max: ºC ºF / Min.: ºC ºF
Max. Extending Speed : m/min Max. Retracting Speed : m/min Cycle Rate : times/hr

03 Cylinder Specifications
a. Working pressure : kg/cm²(psi) b. Testing pressure : kg/cm²(psi) c. Output force : ton
d. Bore(1) diameter : mm(in) e. Rod(2) diameter : mm(in) f. Stroke(3) : mm(in)

04 Mounting Types
Round/Rectangle flange at head - MF3 (4) Round/Rectangle flange at base - MF4 (5)
Plain clevis at base - MP3 (6) Self-aligning clevis at base - MP5 (6)
Plain clevis at center - MT4 (7) Foot mounting -MS2 (8)

05 The Mounting Dimension
FA for MF3(4) : mm(in) / G: mm(in) FB for MT4(5) : mm(in) / J: mm(in)
TC for MT4(7) : mm(in) CA for MP3(6)/MP5(6) : mm(in)

06 Cylinder Mounted Method Vertical Horizontal Slant

07 Cushion Not Required Required [ Both End(9&10) Rod End(9) Head Ends(10) ]

08 Stop Tube(13) : Not Required Required

09 Port Types(16)
PT PF NPT Flange [ JIS series or SAE series ] Block

10 Rod End
Not Required
Required [ Self-aligning Clevis (13) Plain Bearing Clevis Rod End(14) Fork Clevis (15) ]

11 Require Quantity : pcs

12 Quotation Base : Ex-works FOB CIF